top
Click the image to enter this category.
4-Jaw Independent Chucks Click the image to enter this category.
Drill Chucks Click the image to enter this category.
End Mill Sets - 2/4-flute - 3/8" Shank
End Mills (ball nose) - 3-flute - 1/4" Shank
End Mills (double end) - 2-flute - 3/8" Shank
End Mills (double end) - 4-flute - 3/8" Shank
End Mills (long) - 3-flute - 1/4" Shank
End Mills (short) - 3-flute - 1/4" Shank
End Mills (single end) - 2/4-flute - 3/8" Shank
Lathe Accessories
Click the image to enter this category.
Mill Accessories
Click the image to enter this category.
Other Accessories, Books, and Videos
Click the image to enter this category.
1012 - Sensitive Drilling Attachment
1015 - 5/32" Drill Chuck with #0 Morse Arbor
1031/1041/1068/1070 - 2.5" 3-Jaw Chuck
1035/1044/1071/1073 - 2.5" 4-Jaw Chuck
1069 - 3/8" Drill Chuck with two Arbors
1072 - 1/4" Drill Chuck with two Arbors
1075 - 2.5" 4-Jaw Self-Centering Chuck
1076 - 3.1" 4-Jaw Self-Centering Chuck
10880 - Follower Rest Brass Pads (set of 2)
10890 - Follower Rest Hold-down Tab
10930 - Live Center Ball Bearing
10940 - 10-32 x 3/8" Set Screw with Nylon Tip
11570 - Knockout Bar (WW Collet Set)
116000... WW Collets Available sizes are - blank, 1/64" to 5/16", .3mm to 8.0mm
1161/1163 - Collet Adapter and Drawbar
1162/1179 - Deluxe Boxed WW Collet Set
1164/1165 - WW and 8.0 mm Collet Fixtures
11650 - WW Collet Wood Box (Deluxe Set)
11660 - WW Collet Wood Box Insert
11681 - WW Collet Drawbolt (2045 index block set)
11740 - Steady Rest Brass Pads (set of 3)
11770 - 4-Jaw Chuck Jaws (self centering)
1180 - 78-piece boxed WW metric collet set
11821 - Bullnose Live Center Body
11822 - Bullnose Live Center Point
11823 - Bullnose Live Center Preload Nut
1185/1184 - Vertical Milling Table
1187 - Chuck-to-T-Slot Adapter
11880 - #1 Morse Arbor Adapter
11890 - #0 Morse Arbor Adapter
11920 - Carbide Right Hand Tool
11930 - Carbide Left Hand Tool
11940 - Carbide Threading Tool, 60º
11941 - Carbide Tip, 60°, 1/64" nose radius
11990 - Rocker Tool Post Center
1200 - Internal Threading Tool, RH, HSS
1202 - Adjustable Tailstock Chuck Arbor
1203 - Adjustable Tailstock Tool Holder
1204 - Adjustable Tailstock 5/32" 0JT Chuck Arbor
1206 - Adjustable 1" Die Holder
12080 - Adjustable Live Center Face
12090 - Adjustable Chuck Arbor Face
12101 - Adjustable Tool Holder Face
12120 - Adj. 1" Die Holder with 13/16" bushing
12130 - 13/16" Bushing for Adj. 1" Die Holder
1220 - Tailstock Spindle Extender
1230 - #0 Morse to 3/4-16 Thread Adapter
12680 - Compound Slide Screw (metric)
1272 - Compound Slide Riser Block
12720 - Compound Base, Laser Engraved
12730 - Compound Rotating Base
12760 - Compound Slide & Tool Post
12780 - Compound Slide Screw (inch)
12850 - Riser Rocker Toolpost Body
12870 - Riser 3/8" Toolpost Body
1289 - Riser Insert 3/8 Tool Post
1296 - Cutoff Tool Holder Riser Block
12990 - Headstock Riser Pivot Pin
1300 - Mill Column Riser block
13910 - Steady Rest Riser Body
13920 - Steady Rest Riser Clamp
2000/2010 - Deluxe 8-direction Milling Machine
2000A/2010A - Deluxe 8-Direction Mill Package 8-direction Mill, 14" base, "A" package, and more...
2000A-CNC/2010A-CNC - CNC-ready Deluxe 8-Direction Mill Package 8-direction Mill, 14" base, "A" package, CNC-ready, and more...
2000A-DRO/2010A-DRO - Deluxe 8-Direction Mill Package with DRO 8-direction Mill, 14" base, "A" package, DRO, and more...
2000-CNC/2010-CNC - CNC-ready Milling Machine CNC-Ready includes Stepper Motor Mounts, but NOT motors, computer/software, CNC software.
2000-DRO/2010-DRO - Mill with Factory Installed Digital Readout (DRO)
2085/2086 - WW Collet Tailstock Adapter
20880 - WW Collet Tailstock Adapter Body
20890 - 8mm Collet Tailstock Adapter Body
2090/2091/2092/2093 - Collet-to-Thread Adapters
2094/2095/2096 - Clockmaker's Gearcutting Arbors
2100/2101/2102/2103/2104/2105 - WW & 10mm Collet Pot Chucks (various sizes) WW Collets - 3/4", 1", 1 1/4"
10mm Collets - 3/4", 1", 1 1/4"
2106/2107 - Collet-to-Live Center Adapters
2125 - Microscope with Lathe Mount
2127 - Microscope with Mill Mount
2200 - Radius Cutting Attachment
22110 - Radius Cutter Support, Left
22111 - Radius Cutter Support, Right
22120 - Radius Cutter Pivot Pin
2250 - Quick-Change Tool Post System
2251 - Quick-change Tool Post Riser
22510 - Quick Change Toolpost Body
22511 - Quick Change Toolpost Riser Body
22520 - Quick Change Toolpost, Lefthand Cam
22530 - Quick Change Toolpost, Righthand Cam
22550 - Quick Change Toolpost Carbide Insert Holder Body
2256/2257/2258 - 35° Carbide Insert Holders
22561 - Righthand 35º Insert Holder Body
22571 - Lefthand 35º Insert Holder Body
2259 - 80° Carbide Insert Holder with Insert
2260 - 55° Carbide Insert Holder with Insert
22600 - Quick Change Toolpost 1/4" Toolbit Holder Body
2261 - Carbide Insert Holders (2259 & 2260) with Inserts
22620 - Quick Change Toolpost Cam Spring Pin
22630 - Quick Change Toolpost Cam Spring, .12" x 7/16"
2265 - Ceramic Insert Tool Holder
22650 - Quick Change Toolpost, 3/8" Boring Tool Holder Body
2266 - Ceramic 3-Sided Replacement Insert Ceramic 3-sided replacement insert for P/N 2265 Tool Holder.
2267 - Carbide Threading/Grooving Insert Tool Holder Carbide Tool Holder (3/8" shank) for 2-sided carbide inserts (threading or grooving). Requires a P/N 7600 Tool Post Assembly.
2268/2269/2270 - Carbide Inserts (thread, groove) Carbide 2-sided replacement inserts for P/N 2267 Tool Holder.
22680 - Quick Change Toolpost, Knurled Height Adjustment Knob
22700 - Quick Change Toolpost Cutoff Tool Holder Body
22710 - Quick Change Toolpost Cutoff Tool Holder Clamp
2280 - Quick-change 1/4" Tool Holder
2285 - Quick-change 3/8" Tool Holder
2290 - Quick-change Cutoff Tool Holder
2295 - Quick-change Carbide insert holder
3002 - Cutoff Tool Holder with Tool
3003 - Two-Position Tool Post 1/4" & 1/4"
3004 - Knurling Tool Holder w/ Knurls
3005/3005B - 1/4" HSS Tool Blank
3006 - 1/4" Brazed Carbide Tool Set This 3-piece set includes a right-hand tool (P/N 11920), a left-hand tool (P/N 11930), and a 60° threading tool (P/N 11940).
3007 - 1/4" HSS Tool Set This 3-piece set includes a right-hand tool (P/N 11950), a left-hand tool (P/N 11960), and a boring tool (P/N 11970).
3008 - Two-position Tool Post 3/8" & 5/16"
30100 - Headstock Assembly (no motor)
3013 - Step Block Hold-down Set
30130 - Hold-down Clamp (smooth)
30135 - Hold-down Clamp (stepped)
30136 - Convex Nut for Step Block Hold-down
30137 - Concave Washer for Step Block Hold-down
30139- Step Block (not anodized)
3015 - Toggle Switch Dust Cover
3016 - Cut-off Tool Rear Mounting Block
3017 - Crosslide Accessory Plate
3018 - Rear Mount Cut-off Tool Holder
30181 - Rear Cutoff Tool Holder Body
3020 - Sherline 5/32" Hex T-Driver
3021 - 3-piece Center Drill Set This 3-piece set includes a #1 drill (P/N 30240), a #2 drill (P/N 30260), and a #3 drill (P/N 30270).
30220 - Toggle Switch Lock Ring
30240 - #1 Center Drill, .046 tip dia., 1/8" shank dia.
30260 - #2 Center Drill, .078 tip dia., 3/16" shank dia.
30270 - #3 Center Drill, .109 tip dia., 1/4" shank dia.
30280 - #000 Center Drill, .020 tip dia., 1/8" shank dia.
30290 - #00 Center Drill, .025 tip dia., 1/8" shank dia.
30300 - #0 Center Drill, .031 tip dia., 1/8" shank dia.
30440 - 3" Tool Rest (used with P/N 1291)
3047 - Extended Wood Tool Rest Set
30480 - 5" Tool Rest (used with P/N 1291)
3050/3053 - Vertical Milling Column
3050-CNC/3053-CNC - CNC-ready Vertical Milling Column CNC-ready includes Stepper Motor Mounts, but NOT motors, computer/software, CNC software.
3058 - 4-Jaw Chuck Hold-down Set
3060/3090 - Milling Collet Sets
3070 - 2.5" x 1-5/16" Steel Blank with 3/4-16 Thread
3072 - 1/4" Drill Chuck with #1 Morse Arbor
3073 - 3/8" Drill Chuck with #1 Morse Arbor
3074 - Drill Chuck Tool Holder
3079... - End Mill Holders (1/8" to 3/8", 6.0mm to 10.0mm) Part numbers 3075, 3076, 3077, 3078, 3079, 6079, 6080, 6081
3080 - 1/4" Shank, 3-Flute End Mill Set
30810 - 1/4" mill dia., 3/8" cut, 1-13/32" length
30820 - 1/8" mill dia., 3/16" cut, 1-3/32" length
30830 - 3/16" mill dia., 9/32" cut, 1-11/32" length
30840 - 5/16"-24 x 4½" Drawbolt with Washer
3087... - Milling Collets (3/32" to 1/4", 3mm to 6mm) Part numbers - 3087, 3089, 3091, 3092, 3093, 3094, 3095, 3096, 3097
30880 - 1/4"-20 x 5¼" Drawbolt with Washer
3100 - Thread-cutting Attachment
31010 - Screw Cutting Attach., Large Handwheel
31070 - 1/8" x 3/8" Gear Dowel Pin
31100 - 100 Tooth Gear, 56 Pitch, with notch
31110 - 100 Tooth Gear, 56 Pitch, no notch
31200 - 20 Tooth Gear, 24 Pitch
31220 - 22 Tooth Gear, 24 Pitch
31240 - 24 Tooth Gear, 24 Pitch
31260 - 26 Tooth Gear, 24 Pitch
31270 - 127 Tooth Gear, 56 Pitch
31280 - 28 Tooth Gear, 24 Pitch
31300 - 30 Tooth Gear, 24 Pitch
31320 - 32 Tooth Gear, 24 Pitch
31340 - 34 Tooth Gear, 24 Pitch
31350 - 35 Tooth Gear, 24 Pitch
31360 - 36 Tooth Gear, 24 Pitch
31380 - 38 Tooth Gear, 24 Pitch
31400 - 40 Tooth Gear, 24 Pitch
31500 - 50 Tooth Gear, 56 Pitch
31570 - Boring Head Adjustment Dial
31580 - Primary Boring Head, 1.24"
31590 - Secondary Boring Head, 1.24"
3217 - Gear Tooth Cutter Holder
32170 - Gear Tooth Cutter Holder Body
32220 - Index Gear, 72 Tooth, 48 Pitch
32250 - Index Tailstock Center
3230/3231 - Milling Arbor, 7/8" diameter
32320 - Mill Cutter Arbor Cap, 7/8"
32330 - Mill Cutter Arbor Cap, 1"
32340 - Mill Cutter Arbor Cap, 7/8", Short Body
3235/3236 - Milling Arbor, 1" diameter
32370 - Mill Cutter Arbor Cap, 7/8", Long Body
32380 - Mill Cutter Arbor Cap, 1", Short Body
32390 - Mill Cutter Arbor Cap, 1", Long Body
32500 - Indexing Graduation Collar
32510 - 6-32 x 1/8" Nylon Tip Set Screw
32540 - High Speed Drive Belt (for AC/DC motor only)
33050 - DC Motor & Speed Control
3306 - Headstock, DC Motor, and Speed Control Assembly (2800 RPM)
3307 - Headstock, DC Motor, and Speed Control Assembly (10,000 RPM)
33100 - 15" Lathe, metric to inch conversion
33120 - 15" Lathe, metric to inch conv., Zero Handwheels
33150 - 24" Lathe, metric to inch conversion
33200 - 15" Lathe, inch to metric conversion
33210 - 15" Lathe, inch to metric conv., Zero Handwheels
33250 - 24" Lathe, inch to metric conversion
33300 - Standard Mill, metric to inch conversion
33350 - Deluxe Mill, metric to inch conversion
33400 - Standard Mill, inch to metric conversion
33450 - Deluxe Mill, inch to metric conversion
3400 - Oversize 2.5" Handwheel
34020 - Oversize Handwheel Knob
34030 - Oversize Handwheel Shaft
34070 - 2.5" X-/Z-axis Handwheel Body (inch)
34090 - 2.5" X-/Z-axis Handwheel Body (metric)
34110 - 2.5" Y-axis Handwheel Body (metric)
34180 - 2" DRO Handwheel Body (no laser engraving)
34190 - 2.5" DRO Handwheel Body (no laser engraving)
3420-65 - Adjustable Zero Handwheels Part numbers - 3420, 3430, 3440, 3450, 3460, 3465
34210 - 2.5" Zero Adjustable Handwheel Body
34220 - Lock Nut, Zero Adjustable Handwheel
34230 - Zero Adjustable Handwheel Collar, Y-axis (inch)
34240 - Zero Adjustable Handwheel Collar, Y-axis (metric)
34250 - 6-32 x 7/8" Slotted Locking Screw
34260 - Zero Adjustable Handwheel Collar, X-/Z-axis (inch)
34270 - Zero Adjustable Handwheel Collar, X-/Z-axis (metric)
34410 - 2.5" Zero Adjustable Handwheel Body
3480/3485 - Vertical Milling Column w/Zero Adjustable Handwheel
3480-CNC/3485-CNC - CNC-ready deluxe Vertical Milling Column CNC-ready includes Stepper Motor Mounts, but NOT motors, computer/software, CNC software.
34900 - Lathe Zero Adjustable Handwheel Upgrade Kit (inch)
34901 - Lathe Zero Adjustable Handwheel Upgrade Kit (metric)
34950 - Mill Zero Adjustable Handwheel Upgrade Kit (inch)
34951 - Mill Zero Adjustable Handwheel Upgrade Kit (metric)
3500 - Rotary Column Attachment
35150 - Rotary Column Attachment Fixed Clamp Disk
35160 - 2000 Column Graduated Clamping Ring
35170 - 2000 Column Movable Clamping Disk
35180 - Rotary Column Attachment Magnified Scribe Lens
35190 - Rotary Column Attachment Scribe Lens Mounting Block
35610 - 4" x 10" x ½" Aluminum Tooling Plate
3570 - Rotating Mill Vise Base
35710 - Vise Base (for rotating vise)
35720 - Rotating Base (for rotating vise)
35730 - Clamp Ring (for rotating vise)
35740 - Vise Clamp (for rotating vise)
3575 - Mill Vise with Rotating Base
3580/3585 - Multi-direction Vertical Milling Column
36010 - Knurling Holder, Right
36040 - 3/16" x 3/4" Dowel Pin
3605 - 90°, 20TPI, 27T, RH/LH pair
3606 - 90°, 25TPI, 34T, RH/LH pair
3607 - 90°, 30TPI, 40T, RH/LH pair
3608 - 90°, 35TPI, 47T, RH/LH pair
3609 - 90°, 40TPI, 55T, RH/LH pair
3610 - 70°, 50TPI, 68T, RH/LH pair
3611 - 70°, 80TPI, 107T, RH/LH pair
3612 - 90°, 16TPI, 25T, Straight pair
3613 - 90°, 20TPI, 31T, Straight pair
3614 - 90°, 25TPI, 38T, Straight pair
3615 - 90°, 30TPI, 47T, Straight pair
3616 - 90°, 32TPI, 49T, Straight pair
3617 - 90°, 35TPI, 55T, Straight pair
3618 - 90°, 40TPI, 63T, Straight pair
3619 - 90°, 41TPI, 65T, Straight pair
3620 - 90°, 47TPI, 73T, Straight pair
3621 - 70°, 35TPI, 55T, Straight pair
3622 - 70°, 50TPI, 79T, Straight pair
3623 - 70°, 53TPI, 83T, Straight pair
3624 - 70°, 60TPI, 94T, Straight pair
3625 - 70°, 70TPI, 109T, Straight pair
3626 - 70°, 80TPI, 125T, Straight pair
3700-CNC - Rotary Table with Motor Mount
3702 - Right Angle Adjustable Tailstock
37090 - Rotary Table Chuck Adapter
37091 - 3/8-16 to 12 x 1mm Chuck Adapter
37092 - 3/8-16 to 14 x 1mm Chuck Adapter
37093 - 3/8-16 to 1/2-20 Chuck Adapter
37094 - 3/8-16 to 3/8-24 Chuck Adapter
37120 - Rotary Table Worm Housing
37121 - Rotary Table Worm Housing, CNC
37130 - Rotary Table Worm Gear Assembly
37160 - Rotary Table Preload Nut
37180 - Rotary Table Upright, 90° Angle Plate
37190 - Rotary Table Right Angle Base, 90° Angle Plate
37230 - Right Angle Tailstock Case
37240 - Right Angle Tailstock Bracket
37510 - Tilting Angle Table, Top Plate
37520 - Tilting Angle Table, Side Plate (plain)
37530 - Tilting Angle Table, Side Plate (engraved)
37540 - Tilting Angle Table, Bottom Plate
37550 - Tilting Angle Table, Bushing
37560 - Tilting Angle Table, Chuck Hold-down
4000A/4100A - 3.5" x 8" Lathe Package 4000 lathe, 3-jaw and 1/4" tailstock chucks, plus "A" package
4000A-CNC/4100A-CNC - CNC-ready 3.5" x 8" Lathe Package 4000 lathe, 3-jaw and 1/4" tailstock chucks, CNC-ready, plus "A" package
4000A-DRO/4100A-DRO - 3.5" x 8" Lathe Package with DRO 4000 lathe, 3-jaw and 1/4" tailstock chucks, DRO, plus "A" package
4000B/4100B - 3.5" x 8" Lathe Package 4000 lathe, chucks, plus "A" and "B" package
4000B-CNC/4100B-CNC - CNC-ready 3.5" x 8" Lathe Package 4000 lathe, chucks, CNC-ready, plus "A" and "B" package
4000B-DRO/4100B-DRO - 3.5" x 8" Lathe Package with DRO 4000 lathe, chucks, DRO, plus "A" and "B" package
4000C/4100C - 3.5" x 8" Lathe Package 4000 lathe, chucks, plus "A", "B", and "C" package
4000C-CNC/4100C-CNC - CNC-ready 3.5" x 8" Lathe Package 4000 lathe, chucks, CNC-ready, plus "A", "B", and "C" package
4000C-DRO/4100C-DRO - 3.5" x 8" Lathe Package with DRO 4000 lathe, chucks, DRO, plus "A", "B", and "C" package
4000-CNC/4100-CNC - 8" CNC-ready Lathe CNC-Ready includes Stepper Motor Mounts, but NOT motors, computer/software, CNC software.
4000-DRO/4100-DRO - 8" Lathe with Factory Installed Digital Readout (DRO)
40050 - Crosslide Handwheel, Y-axis
40080 - Leadscrew Handwheel, X-axis
40111 - Tailstock Casing, Gib Style
40175 - Saddle Locking Lever (inch)
40176 - 2000 Mill Saddle Travel Extension
40177 - Saddle Nut Assembly with Ball (inch)
4017U/4117U - Mill Saddle Lock Upgrade
4017Z/4117Z - Mill CNC Z-axis Backlash Adjustment Upgrade
40180 - Standard Toolpost Body
40240 - Lathe Headstock Pivot Pin
40250 - Extended Toolpost T-nut
40260 - Precision Ground Head Key
40540 - 18-5/16" x 3/4" Cone Point Set Screw
40750 - Thumbscrew, 10-32 x 1/2"
40760 - Thumbscrew, 10-32 x 5/8"
40860 - Tailstock Locking Screw Lock Grommet
40870 - Tailstock Spindle Locking Screw
4088X - 13" Crosslide Assembly (saddle not included)
40980 - Gib Replacement (Lathe crosslide, Mill X-/Y-axes) Replacement gib for Lathe crosslide -or- Mill X-/Y-axes
40990 - Gib Replacement (Lathe leadscrew, Mill Z-axis) Replacement gib for Lathe leadscrew -or- Mill Z-axis
41040 - Handwheel, Leadscrew or X-axis (metric)
41050 - Handwheel, Crosslide or Y-axis (metric)
4111A - Tailstock Assembly (inch)
4111M - Tailstock Assembly (metric)
41175 - Saddle Locking Lever (metric)
41177 - Saddle Nut Assembly with Ball (metric)
41370 - Leadscrew Support (metric)
4150/4151 - Lathe Vinyl Dust Cover
41890 - Slide Screw Insert (metric)
42040 - Handwheel Body, Crosslide or Y-axis
42080 - Handwheel Body, Leadscrew or X-axis
42140 - Handwheel Body, Crosslide or Y-axis (metric)
42180 - Handwheel Body, Leadscrew or X-axis (metric)
43000 - DC Electronics Speed Control Assembly
43110 - DC Speed Control Cover
43120 - DC Speed Control Hinge Plate
43130 - DC Speed Control Cover Mount Plate
43140 - DC Speed Control Tab, small
43150 - DC Speed Control Tab, large
43230 - DC Stepped Spindle Pulley
43250 - Insulated 16-14 Terminal
43360 - DC Stepped Motor Pulley
43365 - High Speed (10,000 RPM) Pulley Bracket, outer
43366 - High Speed (10,000 RPM) Pulley Bracket, inner
43367 - High Speed (10,000 RPM) Spindle Pulley
43368 - High Speed (10,000 RPM) Motor Pulley
43369 - 10-32 x 1/4" Cup Point Set Screw
43500 - DC Motor Brushes, internal (2)
4400A/4410A - 3.5" x 17" Lathe Package 4400 lathe, 3-jaw and 3/8" tailstock chucks, plus "A" package
4400A-CNC/4410A-CNC - CNC-ready 3.5" x 17" Lathe Package 4400 lathe, 3-jaw and 3/8" tailstock chucks, CNC-ready, plus "A" package
4400A-DRO/4410A-DRO - 3.5" x 17" Lathe Package with DRO 4400 lathe, 3-jaw and 3/8" tailstock chucks, DRO, plus "A" package
4400B/4410B - 3.5" x 17" Lathe Package 4400 lathe, chucks, plus "A" and "B" package
4400B-CNC/4410B-CNC - CNC-ready 3.5" x 17" Lathe Package 4400 lathe, chucks, CNC-ready, plus "A" and "B" package
4400B-DRO/4410B-DRO - 3.5" x 17" Lathe Package with DRO 4400 lathe, chucks, DRO, plus "A" and "B" package
4400C/4410C - 3.5" x 17" Lathe Package 4400 lathe, chucks, plus "A", "B", and "C" package
4400C-CNC/4410C-CNC - CNC-ready 3.5" x 17" Lathe Package 4400 lathe, chucks, CNC-ready, plus "A", "B", and "C" package
4400C-DRO/4410C-DRO - 3.5" x 17" Lathe Package with DRO 4400 lathe, chucks, DRO, plus "A", "B", and "C" package
4400-CNC/4410-CNC - 17" CNC-ready Lathe CNC-Ready includes Stepper Motor Mounts, but NOT motors, computer/software, CNC software.
4400-DRO/4410-DRO - 17" Lathe with Factory Installed Digital Readout (DRO)
4411A - Deluxe Tailstock Assembly (inch)
4411M - Deluxe Tailstock Assembly (metric)
4417Z/4417ZM - Lathe Leadscrew Backlash Lock