Sherline Direct Cart items: 0  Total: $0.00
 
Site Map

The following is a list of all the Categories and Products on our site. We hope it will assist you in finding what you're looking for.


Categories

3-Jaw and 4-Jaw Self-Centering Chucks

4-Jaw Independent Chucks

Accessories

Apparel

Books & Videos

Center Drills - 60°

Chuck Accessories



Chuck Jaws

Chucks

CNC Chucker Lathe

CNC Ready

5400cnc_pic


CNC Ready

4400cnc_pic


CNC Ready Slides

CNC Retrofits

http://sherline.com/pages/images/6701sm.png


CNC Retrofits

6721/6726/6731/6736 - Lathe CNC Upgrade Kit (no computer)


CNC Systems

8440_pic


CNC Systems

CNC Systems


Collets

Collets

Countersinks - 1-flute - 82°

Crosslide Accessories

Cut Off Blade

Cutting Tool - 1/4" Square

Cutting Tools

Cutting Tools

Cutting Tools

Digital Readouts (DRO)

Digital Readouts (DRO)

Dovetail Cutters - 3/8" Shank

Drill Chucks

End Mill Sets - 2/4-flute - 3/8" Shank

End Mills (ball nose) - 3-flute - 1/4" Shank

End Mills (double end) - 2-flute - 3/8" Shank

End Mills (double end) - 4-flute - 3/8" Shank

End Mills (long) - 3-flute - 1/4" Shank

End Mills (short) - 3-flute - 1/4" Shank

End Mills (single end) - 2/4-flute - 3/8" Shank

Full Size Chucks



Handwheels

Handwheels & Leadscrews

Headstocks & Spindles

Hold Downs

Industrial

Inserts

Laser Engraving

Lathe Accessories

 

 


Lathe Retrofit Kits

Lathes

Linear Controllers

Linear Controllers/Power Feeds

Lubricant

Manual Slides

Manually Controlled

5400_pic


Manually Controlled

4000_pic_270x130


Mill Accessories

 

 


Mill Retrofit Kits

Mill Vise

Milling Columns

Mills

Misc.

Misc. Tools

Monthly Special

Motors & Headstocks

Other Accessories

Other Accessories

Other Accessories

Other Industrial Products

Power Feeds

Programmable CNC Slides

Project Kits

Replacement Parts

Replacement Parts

Riser Blocks

Rotary Tables

Rotary Tables and Accessories

Round Shank Boring Tools - 3/8"

Scales

Slitting Saws - 1/2" Hole

Spacers/Risers

Spiral Knurls 30°

Stepper Motors

Straight Tooth Knurls

Tailstock Accessories

Tool Blanks

Tool Holders

Tool Holders

Tooling Plates

Ultimate Machine Shop Tool and Accessory Packages

Watchmaker/Jeweler accessories

With Factory Installed DRO (Digital readouts)

4000adro_pic


With Factory Installed DRO (Digital readouts)

http://sherline.com/Wordpress/wp-content/uploads/2015/08/5400dro_pic-270x203.jpg


XY & XYZ Bases

 

XY & XYZ Bases


top

Products

#0 Center Drill, .031 tip dia., 1/8" shank dia.

#0 Morse Arbor Adapter

#0 Morse Blank

#0 Morse Dead Center

#0 Morse to 3/4-16 Thread Adapter

#00 Center Drill, .025 tip dia., 1/8" shank dia.

#000 Center Drill, .020 tip dia., 1/8" shank dia.

#1 Center Drill, .046 tip dia., 1/8" shank dia.

#1 Morse Arbor Adapter

#1 Morse Blank

#1 Morse Dead Center

#1 Morse Spindle Taper Removal Tool

#2 Center Drill, .078 tip dia., 3/16" shank dia.

#2 x 1/4" Self Tapping Screw

#2 x 3/8” Self-tapping Pan Head Screw

#3 Center Drill, .109 tip dia., 1/4" shank dia.

.010 thick, 2" dia., 140 teeth

.014 thick, 2" dia., 152 teeth

.016 thick, 2" dia., 110 teeth

.020 thick, 2" dia., 152 teeth

.025 thick, 2" dia., 152 teeth

.032 thick, 2" dia., 110 teeth

.045 thick, 2" dia., 110 teeth

.051 thick, 2" dia., 110 teeth

.057 thick, 2" dia., 110 teeth

.275-40 HS Sprial PT Tap
Tap for the WW Collet threads. 

1" WW Collet Blank

1/16" mill dia., 1/8" cut, 1-1/4" length

1/16" mill dia., 3/32" cut, 1-1/64" length

1/16" mill dia., 5/32" cut, 1-3/32" length

1/2" dia., 2-1/8" length, 45°

1/2" dia., 2-1/8" length, 60°

1/4" Brazed Carbide Tool Set

1/4" dia., 1/4" shank dia., 2" length

1/4" Drill Chuck with #1 Morse Arbor

1/4" Drill Chuck with two Arbors

1/4" HSS Tool Blank

1/4" HSS Tool Set

1/4" mill dia., 1/2" cut, 3-1/8" length

1/4" mill dia., 3/8" cut, 1-13/32" length

1/4" mill dia., 5/8" cut, 1-3/4" length

1/4" mill dia., 5/8" cut, 1-3/4" length

1/4" mill dia., 5/8" cut, 3-3/8" length

1/4" Quick Change Tool holder body
This is the tool holder body only; if you want the entire assembly you will need to order part number 2280

1/4" Shank, 3-Flute End Mill Set

1/4"-20 Screw Adapter

1/4"-20 x 3/8" Flathead Screw

1/4"-20 x 5/8" Button Head Screw

1/4"-20 x 5¼" Drawbolt with Washer

1/8" Hex Key

1/8" mill dia., 3/16" cut, 1-3/32" length

1/8" mill dia., 3/8" cut, 3-1/16" length

1/8" mill dia., 3/8" cut, 3-1/16" length

1/8" mill dia., 5/16" cut, 1-11/32" length

1/8" mill dia., 5/16" cut, 1-11/32" length

1/8" x 1" Hard-Steel Dowel Pin

1/8" x 1-1/4" Hard-Steel Dowel Pin

1/8" x 3/4" Hard-Steel Dowel Pin

1/8" x 3/8" Gear Dowel Pin

10 Tooth Industrial Spindle Cog Pulley

10" CNC Mill Base

10" Mill Base

10" Mill Package A

10" Mill Package A with DRO

10" Mill with DRO

10" Milling Machine CNC-ready

10" Vertical Mill with Zero Adjustable Handwheels

10" Vertical Mill with Zero Adjustable Handwheels Package A

10" Vertical Milling Machine

10" XY Base CNC-ready

10" XY base, DRO

10" XYZ Base

10" XYZ Base CNC-ready

10" XYZ Base w/ adjustable handhweels

10,000 RPM Pulley Set

100 Tooth Gear, 56 Pitch, no notch

100 Tooth Gear, 56 Pitch, with notch

10160 - #0 Jacobs to #0 Morse taper

10170 - #0 Jacobs taper to #1 Morse taper

10180 - OJT Chuck Key

1020 - 5C 3" 4-Jaw Chuck

10-24 x 3/4 SHCS

1025 - 5C 4" 4-Jaw Chuck

10-32 Hex Nut

10-32 T-nut, individual

10-32 T-nuts, pack of 10

10-32 T-nuts, pack of 100

10-32 x 1" Thumb screw

10-32 x 1/2" Button Head Hex Screw

10-32 x 1/2" Cup Point Set Screw

10-32 x 1/2" SHCS

10-32 x 1/2" Thumb screw

10-32 x 1/4" Cup Point Set Screw

10-32 x 1/4" SHCS

10-32 x 1-5/8" SHCS

10-32 x 2" SHCS

10-32 x 2-1/4" SHCS

10-32 x 3/16" Cup PT Set Screw

10-32 x 3/4" SHCS

10-32 X 3/8" Button Socket Head Cap Screw

10-32 X 3/8" Set Screw

10-32 x 3/8" Set Screw with Nylon Tip

10-32 X 3/8" SHCS

10-32 x 5/16" SHCS

10-32 x 5/8 SHCS

10-32 x 5/8" Thumb screw

10-32 x 7/8" SHCS

1045 - 5C 3.1" 4-Jaw Independent Chuck

1047 - 5C 4" 3-Jaw Chuck

1062 - #4 Morse 4" chuck with 1/2-13 thread

1065/1066 - ER Collet-to-Sherline Chuck Arbor

11" Manual Column Bed
Used on 5000, 5400 and 2000 series manual mills

11/64" mill dia., 13/32" cut, 1-19/32" length

110 VAC Power Feed

12" Deluxe Mill Package A

12" Deluxe Mill Package A with DRO

12" Deluxe Mill with DRO

12" Deluxe Milling Machine CNC-ready

12" Deluxe Vertical Milling Machine

12" Laser Engraved Deluxe Mill Base (inch)

12" Laser Engraved Deluxe Mill Base (metric)

12" XY Base CNC-ready

12" XY base, DRO

12" XYZ Base

12" XYZ Base CNC-ready

12050 - 8-32 x 3/8" SKHC Screw

127 Tooth Gear, 56 Pitch

13" Crosslide Assembly, inch (saddle not included)

13" Crosslide Assembly, metric (saddle not included)

13/64" mill dia., 15/32" cut, 1-11/16" length

14" 2000 Mill Base (inch)
For use with 2000 series mill columns only

14" 2010 Mill Base (metric)
For use with 2000 series mill columns only

14" 8-Direction Mill Package A with DRO

14" Deluxe 8-Direction Mill Package A

14" Deluxe 8-direction Milling Machine

14" Deluxe 8-direction Milling Machine CNC-ready

14" Mill with DRO

14" XY Base CNC-ready

14" XY base, DRO

14" XYZ Base

14" XYZ Base CNC-ready

15" CNC Lathe Bed

15" Extended Mill Column

15" Lathe Base

15" Manual Lathe Bed

15" Manual Z Axis Leadscrew (inch)

15" Manual Z Axis Leadscrew (metric)

15/64" mill dia., 9/16" cut, 1-13/16" length

150 Tooth Gear, 56 pitch

18" Extended Mill Table

18" NexGen mill base

18" NexGen Mill Package A

18" NexGen mill package A with DRO

18" NexGen Mill with DRO

18" NexGen Milling Machine

18" Table lead screw bushing

18" X Axis CNC Leadscrew (inch)

18" X Axis Manual Leadscrew (inch)

18" XY base CNC-ready

18" XY base, DRO

18" XYZ Base

18" XYZ Base CNC Ready

2 Axis DRO w/ CNC thrust collars

 

 


2" End Mill Holder Style Fixture

2" Ridgid Column Spacer-Round

2" Y Axis Zero Adjustable Handwheel Body
This is the handwheel body only, not a complete assembly. If you need the entire handwheel, you will need part number 3420 

2.5" 3-Jaw Chucks

2.5" 4-Jaw Chuck

2.5" 4-Jaw Self-Centering Chucks

2.5" Handwheel Plug

2.5" x 1-5/16" Steel Blank with 3/4-16 Thread

2.5" X/Z Axis Handwheel Body (inch)
This is the handwheel body only, not a complete assembly. If you need the entire handwheel, you will need part number 3400

2.5" X/Z Axis Handwheel Body (metric)
This is the handwheel body only, not a complete assembly. If you need the entire handwheel, you will need part number 3410 

2.5" X/Z Axis Zero Adjustable Handwheel Body
This is the handwheel body only, not a complete assembly. If you need the entire handwheel, you will need part number 3455

2.5" Y Axis Handwheel Body (inch)
This is the handwheel body only, not a complete assembly. If you need the entire handwheel, you will need part number 3401

2.5" Y Axis Handwheel Body (metric)
This is the handwheel body only, not a complete assembly. If you need the entire handwheel, you will need part number 3411

20 Tooth Gear, 24 Pitch

2000 CNC Z Axis Leadscrew (inch)

2000 Column Graduated Clamping Ring

2000 Column Movable Clamping Disk

2000 Mill 3/8-16 x 2" Shouldered Bolt

2000 Mill Arm Bolt Dowel Pin, 3/32" x 1/2"

2000 Mill Arm Hold-down Bolt

2000 Mill Arm Hold-down Washer

2000 Mill Arm Mount Knuckle

2000 Mill Arm Spacer Block

2000 Mill Column Adjustment Block

2000 Mill Column Extension

2000 Mill Column Extension Bolt

2000 Mill Column Top

2000 Mill Index Tab (90° bend at tip)

2000 Mill Left Swing Arm (not engraved)

2000 Mill Right Swing Arm (engraved)

2000 Mill Saddle Travel Extension

2000 Y Axis CNC Leadscrew (inch)

2000 Y Axis Manual Leadscrew (inch)

2000 Z Axis Manual Leadscrew (inch)

2000/2010 Mill Column Base

2000A-CNC/2010A-CNC - CNC-ready Deluxe 8-Direction Mill Package

2010 CNC Z Axis Leadscrew (metric)

2010 Metric to Inch Conversion

2010 Y Axis CNC Leadscrew (metric)

2010 Y Axis Manual Leadscrew (metric)

2010 Z Axis Manual Leadscrew (metric)

21 Tooth Gear, 24 Pitch

21230 - Brass Spacer

22 Tooth Gear, 24 Pitch

22512 - Quick Change Tool Post Body (assembly)

23 Tooth Gear, 24 Pitch

24 Tooth Gear, 24 Pitch

24" CNC Lathe Bed

24" Lathe Base

24" Manual Lathe Bed

25 Tooth Gear, 24 Pitch

2-56 x 3/8" Pan Head Phillips Screw

26 Tooth Gear, 24 Pitch

27 Tooth Gear, 24 Pitch

28 Tooth Gear, 24 Pitch

29 Tooth Gear, 24 Pitch

2-Axis CNC-Ready Machine Slide w/13" Table

2-Axis CNC-Ready Machine Slide (w/Steel Bed on Raised Base)

2-Axis CNC-Ready Machine Slide w/18" Table

2-Axis Manual Machine Slide (w/Steel Bed on Raised Base)

2-Axis Manual XY Machine Slide w/13" Table

2-Axis Manual XY Machine Slide w/18" Table

2-flute, 1/2" dia., 1" cutter length,    2-1/2" length

2-position Rocker Tool Post (1/4"-3/8")

3 Jaw chuck soft jaws

3" Riser Wood Tool Rest

3" Wood Tool Rest

3.1" 3-Jaw Chuck

3.1" 3-Jaw Electroless Teflon Nickel Coated

3.1" 3-Jaw Self-centering Wood Lathe Chuck

3.1" 4-Jaw Chuck

3.1" 4-Jaw Electroless Nickel-Teflon Coated

3.1" 4-Jaw Self-Centering Chuck

3.1" 4-jaw Self-Centering Chuck with Pie Jaws

3.1" ER-16 3-Jaw self-centering chuck

3.1" ER-16 4-jaw independent chuck

3.1" ER-16 4-Jaw self-centering chuck

3.5" x 17" CNC-ready Lathe

3.5" x 17" CNC-ready Lathe Package A

3.5" x 17" CNC-ready Lathe Package B

3.5" x 17" CNC-ready Lathe Package C

3.5" x 17" Lathe

3.5" x 17" Lathe Package A

3.5" x 17" Lathe Package A with DRO

3.5" x 17" Lathe Package B

3.5" x 17" Lathe Package B with DRO

3.5" x 17" Lathe Package C

3.5" x 17" Lathe Package C with DRO

3.5" x 17" Lathe with Factory Installed DRO

3.5" x 8" CNC-ready Lathe

3.5" x 8" CNC-ready Lathe Package A

3.5" x 8" CNC-ready Lathe Package B

3.5" x 8" CNC-ready Lathe Package C

3.5" x 8" Lathe

3.5" x 8" Lathe Package A

3.5" x 8" Lathe Package A with DRO

3.5" x 8" Lathe Package B

3.5" x 8" Lathe Package B with DRO

3.5" x 8" Lathe Package C

3.5" x 8" Lathe Package C with DRO

3.5" x 8" Lathe with "Zero" Adjustable Handwheels (A package)

3.5" x 8" Lathe with "Zero" Adjustable Handwheels (B package)

3.5" x 8" Lathe with "Zero" Adjustable Handwheels (C package)

3.5" x 8" Lathe with Adjustable Handwheels

3.5" X 8" Lathe with Factory Installed DRO

3/16" dia., 3/16" shank dia., 1-1/2" length

3/16" Hex Key

3/16" mill dia., 1/2" cut, 3-1/4" length

3/16" mill dia., 7/16" cut, 1-21/32" length

3/16" mill dia., 7/16" cut, 1-21/32" length

3/16" mill dia., 7/16" cut, 3-1/8" length

3/16" mill dia., 9/32" cut, 1-11/32" length

3/16" x 3/4" Dowel Pin

3/32" Hex Key

3/32" mill dia., 1/4" cut, 1-1/4" length

3/32" mill dia., 3/16" cut, 1-3/8" length

3/32" mill dia., 5/32" cut, 1-1/64" length

3/8" Ball Bearing

3/8" dia., 1/4" shank dia., 2" length

3/8" Double-Ended End Mill Sets

3/8" Drill Chuck Body
This is the chuck body only; it does not include the key, drawbar or arbors

3/8" Drill Chuck with #1 Morse Arbor

3/8" Drill Chuck with two Arbors

3/8" Insert Holder Tool Post

3/8" mill dia., 3/4" cut, 3-1/2" length

3/8" mill dia., 9/16" cut, 3-1/8" length

3/8-16 Flange Nut

30 Tooth Gear, 24 Pitch

3014 - Step Block Hold-down Set

30141 - 10-32 x 1.5" THREADED STUD

3023 - ER-16 Collet Nut Spanner Set

30860 - Cut Off Tool Blade

31 Tooth Gear, 24 Pitch

31090 - Metal Screw, Pan Head, No. 6 X 3/16”, Type A

32 Tooth Gear, 24 Pitch

33 Tooth Gear, 24 Pitch

33501 - 2000-CNC Inch to Metric Conversion

34 Tooth Gear, 24 Pitch

35 Tooth Gear, 24 Pitch

3560LAZ - Laser Engraving Plate

36 Tooth Gear, 24 Pitch

36030 - .381 X .030 Washer

37 Tooth Gear, 24 Pitch

37130 - Rotary table worm gear assembly

3728 - Rotary Scanner Riser Block and Base

38 Tooth Gear, 24 Pitch

39 Tooth Gear, 24 Pitch

3C Collet Headstock

3C Collet Headstock with Motor Unit

3C Headstock Spindle

This is just the spindle, it is not an entire headstock. Please see part number 30113 for the assembly


3C to ¾-16 chuck arbor

3D Scanning Plates for CNC Rotary Table

3-Jaw Chuck "Pin Jaws"

3-piece Center Drill Set

4" End Mill Holder Style Fixture

4" x 10" Mill Tooling Plate

4" x 10" x ½" Aluminum Tooling Plate
Does not include t nuts or screws; only the tooling plate. If you want the entire assembly you will need part number 3560

40 Tooth Gear, 24 Pitch

4000 Lathe inch to metric conversion

4000 Z Axis CNC Leadscrew (inch)

40150 - 10-32 x 1/2" Flat Point Thumb Screw

40173 - Z Axis backlash adjustment lever

40270/41270 - Tailstock spindle

40310 - 5-40 x 1" SKT HD Cap Screw

40340 - 10-32 X 1" SHCS

4049-DC - DC Motor Speed Control Assembly

40530 - 5-40 X 3/8" SKT HD CAP SCREW

40600 - 10-32 X 1/4" Flat PT Set Screw

40660 - #10 Washer 3/16

40710 - 10-32 x 1-1/4" Skt Hd Cap Screw

40900 - 2 x 3/8” Flat Head Socket Screw

4100 Lathe metric to inch conversion

4100 Z Axis CNC Leadscrew (metric)

43190 - #2 x 1/4" Flat head screw

4-40 x 7/8" SHCS

4400 Lathe inch to metric conversion

4400 Z Axis CNC Leadscrew (inch)

3/8 x 20 left hand thread


4410 Lathe metric to inch conversion

4410 Z Axis CNC Leadscrew (metric)

44171 - Z Axis Backlash Body

44172 - Lathe saddle locking lever

44881 - Crosslide Assembly

44884 - Metric Crosslide Assembly

4500 Lathe inch to metric conversion with Zero Handwheels

45012 - #6 Flat washer (Z-handwheel)

4530 Lathe metric to inch conversion with Zero Handwheels

4-flute, 1/2" dia., 1" cutter length,    2-1/2" length

4-Jaw Chuck Screw

4-Jaw chuck soft jaws

5" Riser Wood Tool Rest

5" Wood Tool Rest

5/16" dia., 1/4" shank dia., 2" length

5/16" mill dia., 3/4" cut, 3-1/2" length

5/16" mill dia., 9/16" cut, 3-1/8" length

5/16-18 X 3/4" Cone Point Set Screw

5/32" 0JT Chuck with #0 Morse adjustable back

5/32" Drill Chuck with #0 Morse Arbor

5/32" Drill Chuck with #1 Morse Arbor

5/32" Hex Key

5/32" mill dia., 1/4" cut, 1-9/32" length

5/32" mill dia., 3/8" cut, 1-17/32" length

5/32" mill dia., 3/8" cut, 1-17/32" length

5/64" mill dia., 7/32" cut, 1-3/16" length

50 Tooth Gear, 56 Pitch

5000 Mill inch to metric conversion

5000 Y Axis CNC Leadscrew (inch)

5000 Y Axis Manual Leadscrew (inch)

5000/5400 CNC Z Axis Leadscrew (inch)

5000/5400 Z Axis Manual leadscrew (inch)

5000A-CNC/5100A-CNC - CNC-ready Mill Package

50220 - 1/4-20 x 1-3/4" SKT HD Cap screw

50920 - Mil Saddle Oiler body

50930 - Mill Saddle oiler cap

5100 Mill metric to inch conversion

5100 Y Axis Manual Leadscrew (metric)

5100/5410 CNC Z Axis Leadscrew (metric)

5100/5410 Z Axis Manual leadscrew (metric)

51161 - Leadscrew, CNC, Y-axis (metric)

5-40 x 3/16" SHCS

5-40 x 7/8" SHCS

5400 Mill inch to metric conversion

5400 Y Axis CNC Leadscrew (inch)

5400 Y Axis Manual Leadscrew (inch)

5400A-CNC/5410A-CNC - CNC-ready Deluxe Mill Package

5410 Mill metric to inch conversion

5410 Y Axis CNC Leadscrew (metric)

5410 Y Axis Manual Leadscrew (metric)

55° Carbide Insert Holders

55° Carbide Insert for 7610 Holder

55° Straight Carbide Insert Holder

56240 - 1/4-20 x 1-1/2" SHCS

5800A-CNC/5810A-CNC - NexGen vertical mill package CNC Ready

5800-CNC/5810-CNC - NexGen vertical mill CNC Ready



5K Potentiometer (1/4 HP)

5th-Wheel Trailer Hitch Weight Scale

6' Extension Cable
Motor to controller 6' extension cable 

6' Parallel DB-25 M-F Cable

6" CNC Crosslide (Table only)

6" CNC Ready Crosslide and Saddle Assembly (inch)
Does not include stepper motor

6" CNC Ready Crosslide and Saddle Assembly (metric)
Does not include stepper motor

6" Manual Crosslide

6" Manual Crosslide and Saddle Assembly (inch)

6" Manual Crosslide and Saddle Assembly (metric)

6000-CNC/6010-CNC - CNC-ready Ultimate Machine Shop Package

60880 - 8" Crosslide, manual. (table only)

61050 - Split Column Base (2-hole)

6200-CNC/6210-CNC - CNC-ready Ultimate Machine Shop Package

6280-CNC/6281-CNC - Ultimate Machine Shop Package w/NexGen Mill - CNC Ready

6-32 x 1/4" Button Head Screw

6-32 x 1/8" Nylon Tip Set Screw

6-32 x 3/8" Flat Head Screw

6-32 x 7/8" Slotted Locking Screw

65014 - Industrial headstock gib

65016 - 30 Tooth Industrial Spindle Cog Pulley

65230 - ER-16 headstock spindle

6540LAZ / 6541LAZ - Laser Engraving Plate and X/Y Base with 18" Table

6580/6581

1 5/8" handwheel with 11" leadscrew assembly


6582/6583

2.5" handwheel with 11" leadscrew assembly


6584/6585

2" zero adjustable handwheel with 11" leadscrew assembly


6586/6587

2.5" zero adjustable handwheel with 11" leadscrew assembly


6590/6591

Stepper motor driven 11" leasdscrew with motor, mount, coupling, and handwheel


6595

stepper motor driven 11" leasdscrew with motor, mount, coupling, handwheel, and CNC linear controller


67041 - CNC Leadscrew Thrust (Metric)

67151 - Deluxe Mill Base, CNC, 12" (inch)

67152 - Deluxe Mill Base, CNC, 12" (metric)

67153 - 8-direction Mill Base, CNC, 14" (inch)

67154 - 8-direction Mill Base, CNC, 14" (metric)

6-Direction, 2-Axis CNC-Ready Machine Slide

6-Direction, 2-Axis Machine Slide

7" x 13" Mill Tooling Plate

7" x 18" Mill Tooling Plate

7/32" mill dia., 1/2" cut, 1-3/4" length

7/32" mill dia., 5/16" cut, 1-13/32" length

7/64" mill dia., 9/32" cut, 1-9/32" length

70°, 35TPI, 55T, Straight pair

70°, 50TPI, 68T, RH/LH pair

70°, 50TPI, 79T, Straight pair

70°, 53TPI, 83T, Straight pair

70°, 60TPI, 94T, Straight pair

70°, 70TPI, 109T, Straight pair

70°, 80TPI, 107T, RH/LH pair

70°, 80TPI, 125T, Straight pair

7500 - 3" x 2.5" x 2" Angle Plate

76130 - 6-32 x 7/16" Button Head Screw

76140 - 5/64" Allen Hex Key

76230 - Insert Locking Screw

8" CNC Crosslide (table only)

8" Crosslide Leadscrew - CNC (inch)

8" Crosslide Leadscrew - CNC (metric)

8" Crosslide Leadscrew - manual (inch)

8" Crosslide Leadscrew - manual (metric)

8" Vertical Machine Slide

8.5" Slide screw (inch)
Replacement lead screw for 1185 - vertical milling table

8.5" Slide screw (metric)
Replacement lead screw for 1184 - vertical milling table

81050 - DRO Power Supply, 110VAC

81051 - DRO Power Supply, 240VAC

81100 - Endoder Unit with cable

81110 - DRO Encoder Housing Cap

81300 - DRO Thrust Collar, X-/Y-axis

81310 - Handwheel sensor gear

81320 - DRO Handwheel, X-axis

81330 - DRO Handwheel, Y-axis

81332 - DRO Handwheel, Y-axis (metric)

81340 - DRO Handwheel, Z-axis

81350 - DRO Thrust Collar, Z-axis

8150 - DRO RPM Package

81500 - DRO Tach Encoder with Cable

81508 - DRO Thrust Collar, Lathe Leadscrew

81509 - DRO Extended Sliding Shaft

8-32 Drive pin

8-32 x 1/4 Pan Head Socket Screw

8-32 x 1/4" Pan Head Screw

8-32 X 7/8" SHCS

8326 - Linux/EMC CNC software on CD

870011 - DGS 2.1mm DC Power Jack

87029 - Motor Driver chip (SLA 7044M)

870291 - Motor Driver chip (SLA7077MPR)

87350 - Remote limit switch cable

87601 - CNC driver box electronic board

87625-09 CNC Electronic Board Assembly (removable fuses)

8763 - Parallel Port Signal Booster

88020 - Linear Controller w/o stepper motor

8-direction Mill Column Upgrade for Mill and Lathe

8mm Collet Adapter for Collet Closer

8mm Collet Tailstock Adapter Body

8mm WW Collet Adapter

9/16" Headstock & Motor S/C Assembly

9/16" Headstock Assembly

9/16" Headstock Spindle

This is the spindle only, not the complete headstock. Please see part number 30110 for the assembly


9/64" Hex Key

9/64" mill dia., 11/32" cut, 1-7/16" length

90° Angle Plate

90° Angle Plate (short)

90°, 16TPI, 25T, Straight pair

90°, 20TPI, 27T, RH/LH pair

90°, 20TPI, 31T, Straight pair

90°, 25TPI, 34T, RH/LH pair

90°, 25TPI, 38T, Straight pair

90°, 30TPI, 40T, RH/LH pair

90°, 30TPI, 47T, Straight pair

90°, 32TPI, 49T, Straight pair

90°, 35TPI, 47T, RH/LH pair

90°, 35TPI, 55T, Straight pair

90°, 40TPI, 55T, RH/LH pair

90°, 40TPI, 63T, Straight pair

90°, 41TPI, 65T, Straight pair

90°, 47TPI, 73T, Straight pair

Accessories for your Rotary Table:

Adapter Base for Lathe Column Upgrade

Adapter Base for Mill Column Upgrade

Adjustable 1" Die Holder

Adjustable Chuck Arbor Face

Adjustable Die Holder Face with 13/16" bushing

Adjustable Live Center

Adjustable Live Center Face

Adjustable OJT Tool holder Face

Adjustable Tailstock 5/32" 0JT Chuck Arbor

Adjustable Tailstock Bullnose Live Center

Adjustable Tailstock Chuck Arbor

Adjustable Tailstock Tool Holder

Adjustable Tool Body

Adjustable Tool Holder Face

Adjustable Zero Handwheels

Aluminum Replacement Pie Jaws

Backlash Lock

Backlash Lock

Backlash Nut, X-axis (inch)

Backlash Nut, X-axis (metric)

Backlash Nut, Y-axis (inch)

Backlash Nut, Y-axis (metric)

Bearing Washer

Belt Guard, inner

Belt Guard, outer

Boring Head

Boring Head Adjustment Dial

Boring Tool

Boring tool with undercut

Bullnose Live Center

Bullnose Live Center Body

Bullnose Live Center Point

Bullnose Live Center Preload Nut

Cam and Lever Arm

Carbide Insert for 55° Holder

(shown in holder, which is not included)


Carbide Insert for 55° Holder (bulk 10)



Carbide Insert for 80° Holder

(shown in holder, which is not included)


Carbide Insert for 80° Holder (bulk 10)



Carbide Inserts

Carbide Left Hand Tool

NOTE: A tool is named by the direction from which the chip leaves the tool; so a left-hand tool has its cutting edge on the right and the chip peels off to the left.


Carbide Right Hand Tool

NOTE: A tool is named by the direction from which the chip leaves the tool; so a right-hand tool has its cutting edge on the left and the chip peels off to the right.


Carbide Threading Tool, 60º

Carbide Threading/Grooving Insert Tool Holder

Carbide Tip, 60°, 1/64" nose radius

Ceramic 3-Sided Replacement Insert

(shown in holder, which is not included)


Ceramic Insert Tool Holder

Chip Guard

Chip Guard
This is just the clear plastic guard, if you need the entire assembly see part number 4360

Chip Guard Hinge

Christmas Specials, 2017

Save 10% on two of our most popular machines
and get a free gift:

4400A-CNC/4410A-CNC Deluxe Lathe with 2 chucks + Free Turner’s Cube Kit
5400-CNC/5410-CNC deluxe mill (12″ base) + Free Jack-in-a-Box Kit

Chuck-to-T-Slot Adapter

Clamp Ring for Rotating Vise

Clock Arbor Bushing

Clock Arbor Cap

Clockmaker's Gearcutting Arbors

CNC 6.5" Crosslide Screw (inch)

CNC 6.5" Crosslide Screw (metric)

CNC Cam Grinder

CNC Chucker Lathe

CNC Chucker Lathe with driver box

CNC Chucker Lathe with PC

CNC Coupling

CNC Coupling for High-Torque Stepper Motor

CNC Laser Engraved Mill Table (inch)

CNC Laser Engraved Mill Table (metric)

CNC Lathe Bed Holddown

CNC Lathe Kit with High-Torque Stepper Motors (no computer)

CNC Lathe Kit with Standard Stepper Motors (no computer)

CNC leadscrew for 18" NexGen base (inch)

CNC leadscrew for 18" NexGen base (metric)

CNC Left Hand Preload Nut (inch)

CNC Left Hand Preload Nut (metric)

CNC Linear Controller Electronics

CNC Linear Controller w/stepper motor

CNC Mill Column Bed

CNC Mill Kit (no computer)

CNC Mill Kit with High-Torque Stepper Motors (no computer)

CNC Mill Table (not engraved)

CNC Preload Bearing

CNC Ready -

CNC Ready Rotary Table

CNC Ready Rotary Table with Reverse Motor Mount

CNC RH Coupling Preload nut (course)

CNC Right Hand Preload Nut (inch)

CNC Right Hand Preload Nut (metric)

CNC Rotary Indexer Riser Plate

CNC Rotary Table coupling

CNC Rotary Table Coupling Adapter

CNC Rotary Table Indexer

CNC Rotary Table Stepper Motor Mount
Not compatible with manual Rotary Tables 

CNC Rotary Table with Stepper Motor

CNC Rotary Table Worm Shaft

CNC System Retrofit for Lathe

CNC System Retrofit for Mill (with computer)

 



CNC Templates

CNC-Ready -

(stepper motor sold separately)


CNC-ready deluxe Vertical Milling Column

CNC-ready NexGen Vertical Milling Column (inch)

CNC-ready Vertical Milling Column

 

 


Collet Closer

Collet Closer Stop Kit

Collet Fixtures

Collet Pot Chucks

Collet Retaining Ring

Collet-to-Live Center Adapters

Collet-to-Thread Adapters

Column Base (one hole)
Compatible with 3050 and 3580 series vertical milling column for a lathe. Is not intended for use on a mill XY base

Column Saddle

Complete CNC Lathe System

Complete CNC Mill System

Complete WW Collet Set (Metric)

Compound Base, Laser Engraved

Compound Clamp Ring

Compound Gib

Compound Nut (inch)

Compound Nut (metric)

Compound Rotating Base

Compound Slide

Compound Slide Riser Block

Compound Slide Screw (inch)

Compound Slide Screw (metric)

Compound Slide Tool Post

Concave Washer for Step Block Hold-down

Convex Nut for Step Block Hold-down

Convex Washer

Crosslide Accessory Plate

Crosslide Gib
Replacement gib for Lathe crosslide -or- Mill X-/Y-axes

Cut Off Tool Holder Body
This is the body only, it does not include the tnuts, screws or blade. If you want the complete tool holder you should order 3002

Cutoff Tool Holder Riser Block

Cutoff Tool Holder with Tool

Cut-off Tool Rear Mounting Block

DC Belt Guard Assembly

Includes belt guards and mounting hardware to mount to a motor/speed control assembly and headstock. Does not include drive belt


DC Electronics

DC Electronics Speed Control Assembly with belt guard

DC Motor & Speed Control

DC Motor Brushes, external
Two external motor brushes for Leeson or Protech motors

DC Motor Brushes, external for Hill House motor (August 2012 and older)

DC Motor Brushes, external for Hill House motor (September 2012 and newer)

DC Motor Brushes, internal
Two internal brushes for older 43450 DC motor

DC Motor Stand-off

DC motor, w/ external brushes (Hill House)

DC S/C Label

DC Speed Control Cover

DC Speed Control Cover Mount Plate

DC Speed Control Hinge Plate

DC Speed Control Tab, large

DC Speed Control Tab, small

DC Stepped Motor Pulley

DC Stepped Spindle Pulley

Deluxe WW Collet Set

Dog

Drill Chuck Tool Holder

Drive Belt
Standard drive belt for all of our machines. The dimensions are 13" x 1/4" with 79 teeth

Driver Box and Power Supply

DRO -

DRO Box with Power Supply

DRO Handwheel, X-axis (Metric)

DRO Handwheel, Z-axis (metric)

DRO program chip for 10k RPM

DRO Stand

DRO Tach Decal

Electronic Filter for EU Countries

End Mill Holders

Engagement Lever

Engraving Headstock Assembly without Grinder

ER-16 Headstock Assembly

ER-16 Headstock, Motor & Speed Control

Extended headstock spacer

Extended T-Nut for Step Block Hold-down

Extended Toolpost T-nut

Extended Wood Tool Rest Set

External Power Supply 24v 4AMP
Power supply for 8760 driver box

Faceplate

Feedscrew (inch)

Feedscrew (metric)

Fixed Jaw Insert

Fixed Shaft (non-DRO)

Fly Cutter

Fly Cutter Body

Follower Rest

Follower Rest Body

Follower Rest Brass Pads (set of 2)

Follower Rest Hold-down Tab

Front Side Multi-Tool Holder - 3/8"

Front Side Multi-Tool Holder - 5/8"

Gang-Tooling Tool Post - 3/8"

Gang-Tooling Tool Post - 5/8"

Gear Bushing

Gear Shaft

Gear Tooth Cutter Holder

Gear Tooth Cutter Holder Body

Gib Lock

Gib Removal Tool

Handwheel for Thread Cutting Attachment

Handwheel Knob

Handwheel Shaft

Handwheel shim washer

Headstock Bearing

Headstock Casing

Headstock Riser Block

This is not a headstock riser assembly. This is the block only. If you want a headstock riser assembly for the mill/lahte you need part number 1297. If you need a riser assembly plus a tool post riser for the lathe you need part number 1291


Headstock Riser Pivot Pin

Headstock Spacer

Headstock Spindle

3/4-16 Thread, #1 morse taper. For entire headstock assembly, including bearings, see part number 30100


Headstock, DC Motor, and Speed Control Assembly (10,000 RPM)

Headstock, DC Motor, and Speed Control Assembly (2800 RPM)

Headstock, Motor & Speed Control (Flat Base)

Headstock, Motor & Speed Control (Dovetailed Base)

High Speed (10,000 RPM) Motor Pulley

High Speed (10,000 RPM) Pulley Bracket, inner

High Speed (10,000 RPM) Pulley Bracket, outer

High Speed (10,000 RPM) Spindle Pulley

High Speed Drive Belt
For AC/DC motor only

High Speed Engraving Spindle

High-Torque Stepper Motor

Hold Down Washer

Hold-down Clamp

Hold-down Clamp (smooth)

Hold-down Clamp (stepped)

Hold-down Set

Hold-down Set

Home Shop Machinist's Handbook

Horizontal Milling Conversion

Horological Milling Machine Bushing and Depthing Accessory

HSS Boring Tool

HSS Left Hand Tool

NOTE: A tool is named by the direction from which the chip leaves the tool; so a left-hand tool has its cutting edge on the right and the chip peels off to the left.


HSS Right Hand Tool

NOTE: A tool is named by the direction from which the chip leaves the tool; so a right-hand tool has its cutting edge on the left and the chip peels off to the right.


Index Bed

Index Block Set

Index Case Cover

Index Gear, 72 Tooth, 48 Pitch

Index Lock Pin

Index Spring

Index Stepping Lever

Index Tailstock Assembly

Index Tailstock Body

Index Tailstock Center

Index Tailstock Gib

Indexing Attachment

Indexing Case

Indexing Graduation Collar

Indexing Head (no bed/tailstock)

Indexing Spindle

Individual WW Collets

Industrial 2.25" Round Cartridge Spindles

Industrial Flanged Cartridge Spindles

Industrial Headstock (dovetail base), 9-16" spindle, cog pulley

Industrial Headstocks on Dovetailed Bases

Industrial Headstocks on Flat Bases

Industrial Saddle Nut Bracket

Insert Clamp

Insulated 16-14 Terminal

Interchangeable Chuck Jaws - 3 Jaw chucks

Interchangeable Chuck Jaws - 4 Jaw chucks

Internal Threading Tool, LH, HSS

Internal Threading Tool, RH, HSS

Jack-in-a-Box Puzzle Kit

Jacobs 1/4" Chuck

This is the chuck body only; it does not include the key, draw bar or arbors


Jacobs 1/4" Drill Chuck Key

Jacobs 3/8" Drill Chuck Key

Knockout Bar (WW Collet Set)

Knurling Holder (left)

Knurling Holder (right)

Knurling Tool Holder w/ Knurls

Ladies Sherline T-shirt (black)

Large Shim Washer

Laser Engraved Deluxe Mill Table (inch)

Laser Engraved Deluxe Mill Table (metric)

Laser Engraving Tilting Angle Table

Lathe Anti Backlash Nut (inch)

Lathe CNC Upgrade Kit (no computer)

Lathe Crosslide Anti-Backlash Upgrade Kit

Lathe Digital Readout (DRO)

 

 

 


Lathe DRO w/240V power supply & plugs

Lathe Dust Covers

Lathe Headstock Hard Stop Kit

Lathe Headstock Pivot Pin

Lathe Leadscrew Backlash Lock

Lathe Leadscrew Power Feed (4000/4500 Lathe)

Lathe Leadscrew Power Feed (4400 Lathe)

Lathe Mylar Label

Lathe saddle locking lever, metric

Lathe Saddle w/ backlash holes

Lathe Tool Height Gage

Lathe Zero Adjustable Handwheel Upgrade Kit (inch)

Includes:
3420 - 2" Y Axis Zero Handwheel
3428 - 2" X Axis Zero Handwheel
3455 - 2.5" Z Axis Zero Handwheel


Lathe Zero Adjustable Handwheel Upgrade Kit (metric)

Includes:
3430 - 2" Y Axis Zero Handwheel
3429 - 2" X Axis Zero Handwheel
3459 - 2.5" Z Axis Zero Handwheel


Leadscrew Support

Leadscrew Support (metric)

Leadscrew Thrust

Lefthand 35º Insert Holder Body

Lever Collet Closer Riser

LH 55° & 80° Boring tools

LinuxCNC Computer System with Driver Box

LinuxCNC Computer System without Driver Box

Live Center

Live Center Body

Live Center Point

Loadmaster Body

Loadmaster O ring
Size: 1/8" X 1-1/8"

Loadmaster Piston

Loadmaster Post
This is the post that screws onto the scale.  It does not include the piston.

Loadmaster Rubber disk
3-1/8" OD x 3/16" thick rubber disk the goes on the bottom of the scale body

Lock (teflon)

Lock Nut for Zero Adjustable Handwheel

Lock, X-axis

Locking Saddle Nut Ball Bearing

Locking Saddle Nut with hole (inch)

Locking saddle nut with hole (metric)

Lower Encoder Housing

Lower hook pin

Lower Housing Cap

Lower O ring

Machine Shop Essentials

Machine Shop Know-How

Machinist's Parallel Bar Set

Manual -

Manual 6.5" Crosslide Screw (inch)

Manual 6.5" Crosslide Screw (metric)

Manual Rotary Table

Manual Rotary Table with Reverse Mount

Manually Controlled -

Micro Grinder riser tool post

Micro Grinder tool post

Mill & Lathe CNC Upgrade with High-Torque Stepper Motors (no computer)

Mill & Lathe CNC Upgrade with standard Stepper Motors (no computer)

Mill & Lathe CNC-Ready Upgrade Kits

Mill & Lathe Combination Packages -

Mill & Lathe Combination Packages -

Mill & Lathe Combination Packages -

Mill & Lathe Combination Packages -

Mill Accordion Way Cover Set

Compatible with the 5000/5400/2000 series mills


Mill Accordion Way Cover Set

Compatible with the NexGen mill only


Mill Accordion Way Covers (2)
This set is 2 of the polypropylene accordion covers for the Y axis of the mill. It does not include any of the hardware. For the complete assembly see part number 5090

Mill Backlash Lock & Nut Upgrade, X-/Y-axis (inch)

Mill Backlash Lock & Nut Upgrade, X-/Y-axis (metric)

Mill CNC Upgrade Kit (no computer)

Mill CNC Z-axis Backlash Adjustment Upgrade

Mill Collet Drawbar
5/16"-24 x 4½" drawbolt and washer for use with our mill collets

Mill Collet Sets

Mill Collets

 

 


Mill Column Base
Mill column base for 5000 & 5400 series mills

Mill Column Pivot Pin

Mill Column Riser block

Mill Digital Readout (DRO)

Mill DRO with 240V adapter & plugs

Mill DRO without box

Mill Mylar Label

Mill Saddle (discontinued)
The mill saddle now comes with an oiler and has changed to part number 50911

Mill Saddle Lock Upgrade

Mill Saddle with oiler

Mill Table

Mill Thrust Collar

Mill Vinyl Dust Cover

(mill not included)


Mill Vise with Rotating Base

Mill Z-axis Power Feed

 

 


Mill Z-Axis Saddle nut with Oiler

Mill Zero Adjustable Handwheel Upgrade Kit (inch)
Includes the following:
3420 - 2" Y axis Zero Handwheel 
3428 - 2" X axis Zero Handwheel 
3460 - 2.5" Z Axis Zero Handwheel with thrust bearing

Mill Zero Adjustable Handwheel Upgrade Kit (metric)
Includes the following:
3430 - 2" Y axis Zero Handwheel 
3429 - 2" X axis Zero Handwheel 
3465 - 2.5" Z Axis Zero Handwheel with thrust bearing

Milling Arbors

Milling Table Base

Milling Vise

Miniature Machine Tools & Accessories Catalog

Modified 10-32 T-nut
For use with the follower rest

Monthly Special November 2017

 

 


Motor Bracket

Motor Fuse for driver box

Movable Jaw Insert

Movable Vise Jaw

Multi-direction Vertical Milling Column

Multi-Direction Vertical Milling Column CNC ready

NexGen CNC System

NexGen Vertical Milling Column (inch)

Nickel-Teflon Coated CNC Ready Rotary Table

Nickel-Teflon Coated CNC Rotary Table Indexer

Nickel-Teflon Coated CNC Rotary Table with stepper motor

Nikx Stikx Metal Cutting Compound 2.2oz

Nut, Y-axis

Nut, Y-axis (metric)

Nylon plug for stepper motor mount

Oil Plug

OJT Chuck body
This is the chuck body only; it does not include the arbor, drawbar or key

O-Ring
Used in 3001 Power Feed

Oversize 2.5" Handwheel

Oversize Handwheel Knob

Oversize Handwheel Shaft

Plug Button

Pool Cue Live Center

Power Cord for 4AMP Supply

Power Cord for DC Motor, Europe

Power Cord for DC Motor, UK

Power Cord for DC Motor, USA

Power Feed Bracket

Power Feed Coupler

Power Feed Motor

Power Feed Motor Case

Power supply for 8700 & 8800
Power supply for the 8700 Rotary table indexer or 8800 Linear controller - 24v, 1000MA, 38 watt

Precision Ground Head Key

Preload Nut

Primary Boring Head, 1.24"

Primary Support Arm

Quick Change Toolpost Body

This is the body only, it does not come with any of the screws or washers. See part number 22512 for the assembly


Quick Change Toolpost Cam Spring Pin

Quick Change Toolpost Cam Spring, .12" x 7/16"

Quick Change Toolpost Carbide Insert Holder Body

Quick Change Toolpost Cutoff Tool Holder Body

Quick Change Toolpost Cutoff Tool Holder Clamp

Quick Change Toolpost Riser Body

Quick Change Toolpost, 3/8" Boring Tool Holder Body

Quick Change Toolpost, Knurled Height Adjustment Knob

Quick Change Toolpost, Lefthand Cam

Quick Change Toolpost, Righthand Cam

Quick-change 1/4" Tool Holder

Quick-change 3/8" Tool Holder

Quick-change 3/8" Tool Holder

Quick-change Carbide insert holder

Quick-change Cutoff Tool Holder

Quick-change Tool Post Riser

Quick-Change Tool Post System

Rack, 48 Pitch

Radius Cutter Body

Radius Cutter Pivot Pin

Radius Cutter Support, Left

Radius Cutter Support, Right

Radius Cutting Attachment

Rear Mount Cut-off Tool Holder

Rear Mount Cut-off Tool Holder Body
This is the body only, it does not include any of the hardware. See part 3018 for the complete assembly

Rear Side Cutoff Multi-Tool Holder - 3/8"

Rear Side Cutoff Multi-Tool Holder - 5/8"

Replacement Carbide Tip for 7620

Replacement Gauge for Suspended Hydraulic Scale

Replacement Gauge for Trailer Tongue Scale

RH and LH 80° Carbide Insert Holders, 3/8" shank

RH Carbide Insert Holders with Inserts

Ridgid arm hold down bolt

Ridgid Mill Column Bases - Round

Right Angle Adjustable Tailstock

Right Angle Attachment

Right Angle Attachment Base

Right Angle Attachment Upright

Right Angle Tailstock Bracket

Right Angle Tailstock Case

Righthand 55º Insert Holder Body

Please note that this is the body of the holder only. It is not the assembly that includes the insert. If you want the whole assembly please order part number 2256


Rigid Column 2" spacer w/extension bolt

Rigid Column Upgrade

Rigid Mill Column Bases - Square

Riser 3/8" Toolpost Body

Riser Insert 3/8 Tool Post

Riser Plate for 8" and 13" Crosslides

Riser Rocker Tool Post

Riser Rocker Toolpost Body

Rocker Tool Post

Rocker Tool Post Body
If you need the entire rocker tool post, not just the body, you would order part number 3057

Rocker Tool Post Center

Rohm 1/4" & 3/8" Drill Chuck Key

Rotary Column Attachment

Rotary Column Attachment Fixed Clamp Disk

Rotary Column Attachment Magnified Scribe Lens

Rotary Column Attachment Scribe Lens Mounting Block

Rotary Controller box with power supply

Rotary Controller box with stepper motor

Rotary Controller box without power supply

Rotary Keypad Overlay

Rotary Table 5" Tooling Plate

Rotary Table 8MM Collet Adapter Nose

Rotary Table Chuck Adapters

Rotary Table Lock Pin

Rotary Table Preload Nut

Rotary Table WW Collet Adapter Alignment Bushing

Rotary Table WW Collet Adapter Nose

Rotary Table WW Collet Adapter Nut

Rotating Base for Rotating Vise

Rotating Mill Vise Base

Saddle Gib
Replacement gib for Lathe leadscrew -or- Mill Z-axis

Saddle Locking Lever (inch)

Saddle Locking Lever (metric)

Saddle Nut (inch)

Saddle Nut (metric)

Saddle Nut Assembly with Ball (inch)

Saddle Nut Assembly with Ball (metric)

Safety Glasses

Secondary Boring Head, 1.24"

Secondary Support Arm

Sensitive Drill Cap

Sensitive Drill Drive Key

Sensitive Drill Shaft

Sensitive Drill Spring

Sensitive Drill Tube

Sensitive Drilling Attachment

Sherline 5/32" Hex T-Driver

Sherline Assembly and Instruction Guide

Sherline Lathe Basics (DVD)

Sherline Multi-Wrench

Sherline Shop Accessory Guide

Sherline Suspended Hydraulic Estimating Scale

Sherline Trailer Tongue Weight Scale

Sherline T-shirt (black)

Sherline T-shirt (gray)

Shop Secrets Video - Measuring Tools (DVD)

Short Two-Position Tool Post (1/4" & 1/4")

Single Flute Inserted Tip Fly Cutter

Single Position 1/4" Tool Post

Single-Axis 13" Manual Machine Slide

Single-axis 18" manual machine slide

Single-Axis 8" Manual Machine Slide

Single-axis CNC machine slide with controller w/ 13" table

Single-axis CNC machine slide with controller w/ 18" table

Single-axis CNC machine slide with controller w/ 8" table

Single-Axis CNC-Ready Slide w/13" Table

Single-Axis CNC-Ready Slide w/18" Table

Single-Axis CNC-Ready Slide w/8" Table

Single-Axis Slide with 3/4x16 Headstock, DC Motor and Speed Control

Single-Axis Slide with 3/4x16 Headstock, DC Motor and Speed Control

Single-Axis Slide with ER-16 Headstock, DC Motor and Speed Control

Single-Axis Slide with ER-16 Headstock, DC Motor and Speed Control

Slide Screw Insert (inch)

Slide Screw Insert (metric)

Sliding Shaft

Slitting Saw Body

Slitting Saw Cap

Slitting Saw Holder

Slow Speed Belt
For slow speed attachment that was part of the old AC/DC motor assembly. 10.835" diameter

Small Shim Washer

Spacer Block Kit

Speed Control Knob

Spindle Bar

Spindle Bar Grips

Spindle bar set with grips

Spindle Handwheel

Split Column Base Bottom

Split Column Base Top

Spur Dowel Pin

Spur Driver

Spur Driver Body

Square Headstock (flat base), 3/4-16, "V" belt pulley

Square Headstock (flat base), ER-16 spindle, "V" belt pulley

Standard 1 5/8"Handwheels

Standard Headstock Assembly

Steady Rest

Steady Rest Body

Steady Rest Brass Pad (individual)

Steady Rest Brass Pads (set of 3)

Steady Rest Clamp

Steady Rest Riser

Steady Rest Riser Body

Steady Rest Riser Clamp

Steam Engine DVD

Steel Replacement Pie Jaws

Step Block (anodized)

Step Block (not anodized)

Step Block Hold-down Set

Stepper Motor (with plug)

Stepper Motor (without plug)

Stepper Motor Mount

Stepper Motor Mount for 6500

Stepper Motor Spindle Mount Kit

Stepper Motor Wire with 5 pin plug

Stepper Motor Wire with 6 raw wire leads (no plug)

Super-Lube Multi-Purpose Synthetic Lubricant 11oz

Super-Lube Teflon (PTFE) grease 3oz

Suspended Hydraulic Scale body

Suspended Hydraulic Scale hook

Suspended Hydraulic Scale piston

T7 Torx Driver

Tabletop Machining by Joe Martin

Tabletop Machining by Joe Martin - $32
Get $10 off the book when purchased with any machine. If not purchased with a machine the price is $42.

Tailstock Assembly w/Standard Handwheel (inch)
Includes case, gib, spindle, feed screw and handwheel

Tailstock Assembly w/Standard Handwheel (metric)

Includes case, gib, spindle, feed screw and handwheel


Tailstock Assembly w/Zero Handwheel (inch)
Includes case, gib, spindle, feed screw and handwheel

Tailstock Assembly w/Zero Handwheel (metric)
Includes case, gib, spindle, feed screw and handwheel

Tailstock Casing, Gib Style

Tailstock Gib

Tailstock Locking Screw Lock Grommet

Tailstock Riser Block

Tailstock Riser Body

Tailstock Riser Clamp

Tailstock Spindle Extender

Tailstock Spindle Locking Screw

Thread-cutting Attachment

Thrust Bearing Set

Thrust Bearing Washer

Thrust Collar

Tilting Angle Table

Tilting Angle Table Bottom Plate

Tilting Angle Table Bushing

Tilting Angle Table Chuck Hold-down

Tilting Angle Table Side Plate (engraved)

Tilting Angle Table Side Plate (not engraved)

Tilting Angle Table Top Plate

Timing Belt
The dimensions of the timing belt are 11" x .37" with 55 teeth

Timing Belt Pulley

Toggle Switch

Toggle Switch Dust Cover

Toggle Switch Lock Ring

Torque Screw

T-Rest
This is the replacement t-rest for the WR Smith T-Rest.

T-Rest Saddle Body

T-Slot Cutter (carbide)

Turner's Cube Kit with 4-jaw chuck

Turner's Cube Kit without 4-jaw chuck

Two-Position Tool Post (1/4" & 1/4")

Two-position Tool Post (3/8" & 5/16")

Ultimate CNC Machine Shop

Ultimate CNC Machine Shop w/NexGen mill

Ultimate Machine Shop Package w/NexGen Mill

Ultimate Machine Shop Package w/NexGen Mill - with DRO

Ultimate Machine Shop Packages

Ultimate Machine Shop Packages with DRO

Upper hook pin

Upper O ring

Vertical Milling Column

Vertical Milling Column w/DRO

Vertical Milling Column w/Zero Adjustable Handwheel

Vertical Milling Table

Vertical Milling Table w/ DRO handwheel

Vertical Sheer Bit

Vise Base for Rotating Vise

Vise Body

Vise Clamp for Rotating Vise

Vise Pulldown Member

W.R. Smith T-Rest

Washer, #8

Washer, 1/2"

Washer, 1/4"
OD (outside diameter) - 1/2"
ID (inside diameter) - 1/4"

Washer, for 1/4" x 20 Drawbolt

Washer, for 5/16" x 24 Drawbolt

With Accessory Package -

With Accessory Package -

With Accessory Package -

Wood Tool Rest Body
This is the body only for the wood tool rest, it does not include any of the screws or the tnut. See part number 3038 for the complete assembly and replacement parts breakdown

Wood Tool Rest Set

WW Collet Adapter

WW Collet Box (w/ insert)

WW Collet Box 96 holes (w/insert)

WW Collet Drawbolt (2045 index block set)

WW Collet Set

WW Collet Set Drawbar
Does not include knock out bar, which is part number 11570

WW Collet Tailstock Adapter

WW Collet Tailstock Adapter Body

WW Collet Wood Box (No insert)

WW Collet Wood Box Insert

WW Drawbar for Indexing Attachment

WW or 8mm Collet Adapter and Drawbar

X Axis CNC Leadscrew (inch)

X Axis CNC Leadscrew (metric)

X Axis Manual Leadscrew (inch)

X Axis Manual Leadscrew (metric)

X/Y Axis Linear Controller

X/Z Axis Handwheel Body (inch)
This is the handwheel body only, not a complete assembly. If you need the entire handwheel, you will need part number 40080

X/Z Axis Handwheel Body (metric)
This is the handwheel body only, not a complete assembly. If you need the entire handwheel, you will need part number 41040

X/Z Axis Zero Adjustable Handwheel Collar (inch)

X/Z Axis Zero Adjustable Handwheel Collar (metric)

XY Bases

Y axis brass tube, 5.5"
Compatible with the 5000/5100 mill. You must have the column base with the hole through the center in order to use this part

Y axis brass tube, 7.5"
Compatible with the 5400/5410 mill. You must have the column base with the hole through the center in order to use this part

Y Axis Handwheel Body (inch)
This is the handwheel body only, not a complete assembly. If you need the entire handwheel, you will need part number 40050

Y Axis Handwheel Body (metric)
This is the handwheel body only, not a complete assembly. If you need the entire handwheel, you will need part number 41050

Y Axis Manual Lead Screw for 18" base (inch)
For use with the 58011 NexGen 18" base only

Y Axis Zero Adjustable Handwheel Collar (inch)

Y Axis Zero Adjustable Handwheel Collar (metric)

Z Axis Bored Column Thrust

Z Axis Leadscrew for 4000 Lathe (inch)

3/8"-20 Left Hand bed lead screw for model 4000 lathe


Z Axis Leadscrew for 4100 Lathe (metric)
10 x 1MM Left Hand bed lead screw for model 4100 lathe

Z Axis Leadscrew for 4400 Lathe (inch)
3/8-20 Left hand bed lead screw for model 4400 lathe

Z Axis Leadscrew for 4410 Lathe (metric)
3/8-20 Left Hand bed lead screw for model 4410 lathe 

top

Feature Articles

top

 

 

Site Map