Sherline Direct Cart items: 0  Total: $0.00
 
Rotary Table with Reverse Mount
Rotary Table with Reverse Mount

Product #: 3700-OP
Price: $343.50

[Add to Wishlist]

Quantity:
In stock

The reverse rotary table is perfect for using on the tilting angle table (P/N 3750). The reverse mount allows access to the handwheel from the front of the machine (see photo below). If you used a standard rotary table in the previously described set-up the handwheel would be mounted facing the backside of the X-axis.

3700-op_setup_pic

 

3700-OP Rotary Table set up on a 3750 Tilting Angle Table. Click on image for a larger view.

 

 

Included Parts:
  • 2 35580 Hold-down clamps
  • 4 30561 10-32 T-nuts
  • 2 40330 SHC Screw, 10-32 X 5/8″
  • 2 40510 SHC Screw, 10-32 X 3/8″
  • 1 37090 Chuck Adapter

The rotary table is now also available with a stepper motor mount attached ready for the application of a stepper motor and CNC controls. See P/N 3700-CNC-OP.

Replacement Parts

3058 - 4-Jaw Hold Down Set Assembly
10930 - 3/8″ Bearing
37090 - Rotary Table 3/8-16 to 3/4 x 16 Chuck Adaptor
37110 - Rotary Table Assembly w/Worm Housing Assembly (NOT sold separately) 
37130 - Worm Shaft
37150 - Oil Plug
37160 - Preload Nut
37170 - Rt Lock Pin-Hardened
37200 - 10-32 X 3/8″ Button Head SHC Screw
37220 - 6-32 X 1/4″ Button Head SHC Screw
40050 - Handwheel Assembly
40420 - Headstock Bearing
40540 - 5/16-18 X 3/4″ Cone Point Set Screw
40660 - #10 Washer 3/16
40670 - 10-32 X 1/2 ” Skt Hd Cap Screw
50120 - Back Lash Lock Pointer

(NOTE: Because components of the table are ground as a set during production, the P/N 3700-OP rotary table cannot be upgraded to the P/N 3700-CNC-OP version later on. A new rotary table with stepper motor worm housing must be purchased.)

For in-depth details about the Sherline 4″ Rotary Table CLICK HERE

Download PDF 3700 Instructions

Instructions PDF Download

 




May we also suggest
Tilting Angle Table
Tilting Angle Table


 

Site Map