With this attachment the Sherline lathe can be quickly and easily converted into a small milling machine. The attachment consists of a steel dovetailed vertical column with a multi-directional adjustable base that attaches to the bed of the lathe in place of the headstock. The headstock then mounts to a dovetailed saddle on the vertical column. The saddle is raised and lowered to control the depth of cut by turning a handwheel. This column provides the 8-direction movement capability of the Model 2000 mill. Calibrations on the handwheel enable depth control to .001" (.01mm on metric machines). Parts to be machined are mounted on the crosslide. An adjustable "zero" handwheel is standard on this model.
This is a good way to get into milling. Most standard vertical milling operations can be performed with this attachment, with only size being the basic limitation. Conversion from the lathe to milling takes less than one minute. Almost all Sherline milling accessories can be used with the setup. At a later date, should you wish to upgrade to a complete vertical milling machine, the column will fit the Sherline XY base (P/N 5600/5610). This offers a cost savings compared to purchasing a complete Model 2000 vertical milling machine, because you save the cost of a second headstock, motor and speed control.
Standard 3-axis vertical milling columns are also available. See P/N 3050 for other options.
Download PDF 3580 Instructions